Old Man Emu Upper Control Arms (UCA) Kit for 2003-2024 4Runner, FJ Cruiser, Lexus GX470/GX460 (Prado 120/150 platform)
When an Independent Front Suspension (IFS) vehicle is fitted with a suspension lift, the caster and camber can be pushed outside the factory specifications. IFS vehicles generally have a few degrees of adjustment in their camber and caster from the factory. Adding the Old Man Emu UCA Kit brings the alignment cams back into an acceptable range for both caster and camber.
Wheel Alignment
Please note, after fitment of Old Man Emu UCA, a wheel alignment is required. If the vehicle is fitted with aftermarket tires/wheels, fender clearance should be checked. Additional caster may be required if the tires/wheels do not clear. Wheel alignment information is included in the fitting instructions.
The OME UCA Kit will provide an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures based off an approximate 50mm or 2in lift).
UCA Kit Features:
- Forged Ball Joint Housing
- Forged Eyelets
- Heavy Duty greasable Ball Joint
- OME Ball joint protective cap
- GIIRO bushings, free pivoting, grease free and maintenance free
- Increased camber/caster for 2in lift
- Mount provision for OE ABS wires
- ARB’s Integrit powder coat finish
- Boxed in pairs with foam inserts
- Fitting instructions included
- OME Branded outer sleeve
- UCA tested and passed to meet VSB14 requirements

Reviews
There are no reviews yet.