96-02 3rd Gen 4Runner Rock Sliders, 65-inch
$349.00
Estimated Lead Time: ~3-4 weeks
Built by the Originators. Trusted on the Trail.
We’ve been building and installing Rock Sliders since the early days of rock crawling, long before they were standard equipment. (Back then we called them “Nerf Bars”!) We are the very first Rock Crawling company to build & install Rock Sliders. With over 30 years of real-world experience, these aren’t just parts we sell, they’re protection we rely on every day.
Why Rock Sliders Matter
When your front tire climbs an obstacle, the body often comes down onto the rock before the rear tire follows. Without proper protection, that contact happens directly against your rocker panels and cab.
Rock Sliders are designed to take that hit, allowing your vehicle to slide across the obstacle while protecting the body from costly damage.
Weld-On Strength. Built for Real Use.
We chose a weld-on design for one simple reason: maximum strength with less weight.
Unlike bolt-on sliders that rely on multiple brackets and fasteners, a weld-on slider becomes part of the frame itself. This eliminates flex, reduces weight, and removes exposed hardware that can get caught or sheared off on the trail.
Bolt-on designs certainly have their place: they’re quick to install and require no fabrication. But for those who demand the strongest, cleanest solution, weld-on remains the gold standard.
What Sets Our Sliders Apart
- USA-Sourced, Dent-Resistant Steel
- USA-Built from high-strength steel designed to withstand repeated trail impacts
- 1.75” x 0.120” Wall Tubing (Main & Outer Bars)
- A proven balance of strength, weight, and durability
- Angled Outer Bar for Protection & Clearance
- Helps deflect rocks away from the body while maintaining usable step area
- Hi-Lift Jack Support Along the Entire Length
- Designed to support vehicle weight with minimal deflection.
- Frame Gussets Included
- Reinforces each mounting point for improved load distribution and durability
- Low-Profile, Trail-Focused Design
- Built for clearance first, without unnecessary bulk or weight
Fitment & Length Options
Available in multiple lengths to match a variety of wheelbase configurations:
- 60-inch
- Great for 100-108″ wheelbase
- 1979-1995 Shortbed Pickup and 4Runner
- 1996-2002 Single cab Shortbed Tacoma
- 65-inch (this product)
- 1996-2003 3rd gen 4Runner specific design & fitment
- 70-inch
- Great for 108-118″ wheelbase
- 1979-1983 Long bed Hilux/Pickup
- 1984-1988 Long bed Hilux/Pickup
- 1984-1988 XtraCab Hilux/Pickup
- 80-inch
- Great for 118-128″ wheelbase
- 1989-95 XtraCab Hilux/Pickup
- 1995-2023 AccessCab Tacoma with Long Bed
- 1995-2023 DoubleCab Tacoma with Short Bed
Select the size that best matches your vehicle’s wheelbase and intended coverage.
What’s Included
- Left & Right Rock Sliders (Fully welded main structure)
- Weld-on mounting legs (may require shortening based on application and positioning along frame rail)
- Frame gussets for each leg connection
- Shipped raw/uncoated for finishing of your choice
Built to Take the Hit So Your Body Doesn’t
When you’re out on the trail, body damage isn’t just cosmetic, it’s permanent. These sliders are built so you can focus on the obstacle ahead, not what’s underneath you.
| Feature | Weld-On Sliders (Marlin Crawler) | Bolt-On Sliders |
|---|---|---|
| Strength | Directly welded to frame for maximum rigidity | Dependent on brackets and hardware |
| Flex Under Load | Minimal | Moderate to high |
| Ground Clearance | High (no drop brackets) | Reduced (brackets hang below frame) |
| Hardware Exposure | None | Bolt heads exposed to impact |
| Weight | Lighter (no heavy brackets) | Heavier due to mounting structure |
| Installation | Requires welding | Simple bolt-on install |
| Removability | Permanent installation | Easily removable |
| Long-Term Durability | Excellent | Hardware and brackets can wear or loosen, requires retightening and replacements over time |
| Best For | Maximum strength, serious off-road use | Quick install, no fabrication required |
We build our Rock Sliders for real trail use: Where strength, clearance, and reliability matter most.
For customers who want maximum protection with the cleanest possible design, weld-on sliders remain the strongest and most proven solution and is why we have used this design for decades.
| Weight | 68 |
|---|---|
| Dimensions | 65 × 7 × 3.5 in |
| Make | Model | Year | Notes |
|---|---|---|---|
| Toyota | 4Runner | 1996 - 2002 |
We appreciate your feedback! Please share your thoughts on the product itself, including its performance, design, and how it meets your needs.
Guidelines for Submitting a Review:
- Account Required: In order to limit spam we ask that you please Log In first.
- Focus on the Product: Please review the product's performance, durability, and how it fits your expectations.
- Avoid Reviewing the Shopping Experience: If you have feedback regarding our website, customer service, or shipping, please contact us directly at Customer Service to help us improve this process of customer experience.
- Be Honest and Detailed: Whether your experience was positive or had room for improvement, we want to hear about it.
- Respectful Language: Please use respectful and appropriate language in your review.
What Happens Next?
- Review Moderation: All reviews are subject to moderation before being published. This ensures that the feedback we share with our community is helpful, relevant, and focused on the product.
- Private Outreach: If we receive constructive feedback, our team may reach out to you directly to better understand your experience and explore ways we can improve.
Thank you for helping us make 96-02 3rd Gen 4Runner Rock Sliders, 65-inch even better!
You must be logged in to post a review.
Proposition 65 Warning for California Consumers
WARNING: Products we sell can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to p65warnings.ca.gov.
Reviews
There are no reviews yet.