In 1994 Marlin Crawler became the first company to use these beefy 23mm tie rod ends for steering setups on Pickups and 4Runners!
Marlin Crawler Heavy Duty tie rod ends are very beefy at up to a 6mm larger thread diameter than stock resulting in 83% more strength for extra insurance on and off the road!
Pre-greased and ready to bolt-in and go! Made In Japan 
by Three Five (555, Triple 5)!
Includes one each of the following:
- 23mm Tie Rod End
- Castle Nut
- Cotter Pin
Please note these will only fit oversized tubing tapped for 23×1.50mm TREs, such as our Heavy Duty USA-made D.O.M. Marlinks used in our Marlink Kit and High Steer Kits. Left- and right-hand Jam nuts sold separately here.
Please specify Right- or Left-handed thread below.
| Weight | 1.2 lbs |
|---|---|
| Dimensions | 3 × 3 × 3 in |
| Side | Right, Left |
| Make | Model | Year | Notes |
|---|---|---|---|
| Lexus | LX450 | 1996 - 1997 | |
| Toyota | 4Runner | 1984 - 1989 | |
| Toyota | 4Runner | 1990 - 1995 | |
| Toyota | Hilux | 1979 - 1983 | |
| Toyota | Hilux | 1984 - 1988 | |
| Toyota | Hilux | 1989 - 1995 | |
| Toyota | Land Cruiser 40-series | 1958 - 1984 | |
| Toyota | Land Cruiser 50-series | 1967 - 1980 | |
| Toyota | Land Cruiser 60-series | 1980 - 1989 | |
| Toyota | Land Cruiser 80-series | 1990 - 1997 |
Proposition 65 Warning for California Consumers
WARNING: Products we sell can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to p65warnings.ca.gov.
