Steel Braided Clutch Line Kit

You are here

Steel Braided Clutch Line KitSteel Braided Clutch Line Installed, 01Steel Braided Clutch Line Installed, 02
Price:
$35.00

We are happy to offer a new product to our clutch hydraulics: Our new Steel Braided Clutch Line Kit!

This kit replaces the stock rubber line that extends down to your clutch slave cylinder. Not only is it more durable and longer lasting, but it will improve the linear feel of your clutch pedal as it resists expansion.

These lines are made in the USA and exceed the Department of Transportation Motor Vehicle Standard MVSS-106. They are Military-Grade featuring a strong one-piece crimp design, UV protection layer, stainless steel braid, protection layer, Kevlar braid, and finally a Teflon inner core to minimize internal friction. Crown steel braided lines are used by the US Navy, Army, Marines, and Air Force and are the same that we've trusted for more than a decade to get us to the trail and back home safely!

Don't let a stray rock or tree stump rip apart your stock rubber line. Don't get stuck with a leaking or inoperable clutch hydraulic system!

Kit includes:

  • 1x Steel Braided Clutch Line
  • 2x Clutch Line Clip
  • 2x Clutch Line Clip Shim

Applications include all 1979-1995 Toyota Hilux trucks and 4Runners, 1995-2004 Tacomas, and 1996-2002 4Runners. Compatible with 2WD or 4WD. Depending on application, some frame brackets have a larger opening and will require both clip shims to compensate for this extra gap. The installed photos at left are from a 1982 4WD Pickup and only require 1 clip shim as shown at the lower side of the upper frame bracket.

Proposition 65 Warning for California Consumers

WARNING: Products we sell can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

Why we use Crown Performance for our Brake and Clutch Lines

Features
  1. Virtually no volumetric expansion.

  2. Hose assemblies comply with federal regulations D.O.T. MVSS-106. All assemblies pressure tested to 4,500 PSI.
  3. Teflon inner core is chemically inert, non-aging, and unaffected by atmospheric conditions or moisture. Retains full flexibility.
  4. Stainless steel outer braid provides added double protection to the inner single braid of Kevlar and barrier layers.
  5. Standard S.A.E. fittings are an exclusive One Piece design with unmatched strength and reliability.
  Benefits
  1. Brake and clutch pedal response is immediate, not "soft" as with standard hoses.
  2. Legal for all street and racing vehicles.


  3. Inert to all approved brake fluids including D.O.T. 5 silicone performance fluid. Outer vinyl cover is UV protected for maximum life.
  4. Rugged construction resists shock and road hazards. Higher fitting pull-off rating than other lines on the market.
  5. Utilizes standard brake fitting adapters for compatibility and ease of use.

Used by the US Navy, Army, Marines, and Air Force

Military thank you letter to Crown Performance Products    Military thank you letter to Crown Performance Products

Both Hand Made and Pressure Tested in the U.S.A.

Crown Manufacturing

Marlin Crawler is serious about your Brake and Clutch safety!

USA Made Crown Performance Products