We are excited to offer Bilstein’s 5100-series Adjustable Ride Height Front Struts for your 1995-2004 2WD PreRunner and 4WD Tacoma!

These struts are designed for front coilover suspension systems and feature multiple snap ring grooves to position the spring seat at 0" (stock), 1.25", or 2.50" higher up the strut body than stock. The result is a final ride height front adjustment from 0" to 2.50" higher than stock for improved tire and ground clearances as well as leveling your front with your rear suspension. This is a great alternative to coil spacers because the shock is designed with a full range of operation regardless of the position used.

This is also an inexpensive alternative to a fully threaded type strut body, and features Bilstein’s famous monotube design backed by a Lifetime Warranty. Also uses the same self-adjusting deflective disc valving used in every other Bilstein shock we carry for superior ride compliance.

Simply replace your factory strut/shock while maintaining your factory coil spring. Race inspired with an oversized self-adjusting digressive piston and valved specifically for the 1st gen Tacoma. Put Bilstein’s high pressure nitrogen gas performance to use in your truck today!

Install notes: Keep in mind that raising or lowering your front suspension will alter its camber, toe, and caster measurements. Therefore we recommend getting your front suspension re-aligned, especially if the ride height changes, and after any successive ride height adjustment. Bilstein does not recommend using these in conjunction with big coil spacers and neither do we. Regardless, the factory upper control arms (UCA) can only take around 2.75 to 3-inches of total lift gain. Any higher and you’ll need to run aftermarket UCAs in order to regain the ability to set factory alignment settings.

Sold separately. Qty 2 required per vehicle.