We have not released an "Official" installer yet, but for now please use this basic information as a guide on how to install our new Short Throw Shift Kit for W56-A and W56-B Transmissions. Thank you bryanrz for providing the images!
Step 1. Remove your interior boot to expose you stock base.
Step 2. Remove the stock handle & base and clean & degrease the surface to prepare for it's new silicone seal.
Step 3. Install our new Short Throw base using a thin layer of silicone (available here) with our included Red Heavy Duty Shift Seat!
Step 4. Install our new Short Throw Shift Handle with our Heavy Duty Shift Socket and new Toyota boot pre-installed and you're done! Use a thin coat of silicone between the Handle Shift Retainer and the top of our Shifter Base.
Step 5. Get out and enjoy your new shifter!
The entire job should take a first-time installer approximately 20 minutes to complete.
Here is a comparison photo from this customer. You can see that before he had to remove the shift knob from his Crawl Box shifter due to it contacting his shift handle in 4th gear.
Now with our new Short Throw Kit installed, you can see how much extra clearance there is in the same 4th gear position, and he was able to finally re-install his Crawl Box shift knob: