U-Bolt Flip Kit

You are here

Suspension » Parts
Price:
$59.00
USA-made using USA-steel
Including bolts, nuts, and washers!

U-Bolt Flip kits place the U-Bolt plates above the spring pack by reversing the installation of the U-Bolts. This increases your ground clearance and puts the Nuts and U-Bolt threads above the springs and away from the rocks. Our NEW Heavy Duty plates are made from 3/8" laser cut steel -- 50% thicker than our old plates! Kits feature large 9/16" U-bolts in all 4 positions. U-bolts are specially designed to fit both early and late style axles. U-Bolts, nuts, and washers are all gold galvanized to ensure a long life and a clean fit. Crossover steering is required for front application.

Front early axle kits (1979-83) feature round U-bolts. Front 1984 - 85 axles receive square bent U-Bolts for a snug fit with no gap between the axle and U-bolts. The rear application fits 1979-2004 Hilux, T100, Tacoma, and 4Runner models both 8.0" and 8.4" housings.

Please note the rear application will require replacement or relocated shock mounts. Compatible with pinion angle shims that fit the width of the stock Toyota spring perch. Not compatible with lift blocks. 1989-95 single cab pickups will require installation of replacement 2.5" spring perches.

Toyota applications include:

  • 1979-2004 Rear axles (4 round short u-bolts).
  • 1979-83 Front axles (3 short and 1 long round).
  • 1984-85 Front axles (2 square, 1 short and 1 long round).
WARNING: California's Proposition 65

Proposition 65 Warning for California Consumers

WARNING: Products we sell can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

Energy Suspension's Performance Polyurethane Components


We are now using Energy Suspension!

Hyper-Flex
Soft or worn-out O.E.M. rubber bushings and mounts will cause poor handling and alignment, excessive body roll and dangerous drivetrain movement. Energy Suspension's Hyper-Flex™ material is the result of years of experience working with and formulating polyurethane materials perfected to outlast and outperform rubber. Careful selection of material firmness or durometer is used for each specific application on the vehicle's suspension and chassis to ensure improved vehicle control without compromising ride quality.

Hyperformance

Why we recommend Energy Suspension's Hyper-Flex™:

  • Ultimate in Performance and Durability
  • Guaranteed to outlast rubber by a minimum of 5 to 1
  • Impervious to gas, oils, and other petroleum products
  • Will not rot or deteriorate from smog, ozone, or road salts
  • Formulated for its specific purpose (correct hardness for each application)
  • Soft enough for a smooth ride and yet firm enough for the most demanding environment

Energy's Hyper-Flex™ is superior performance polyurethane which has proven itself under the most demanding conditions on the race track, off-road, and street performance driving. Hyper-Flex™ components are a great value, not only because they will outlast rubber 5 to 1, but because they are a cost effective performance improvement for your car or truck. Whether domestic or import, front, rear or 4WD, old or new, your vehicle will achieve that level of performance that has made Energy Suspension the most asked-for name in performance polyurethane components. All Hyper-Flex™ components are proudly Made In America!


Energy Suspension Is The World's Largest Manufacturer
Of Precision Engineered Polyurethane Components

Made In America!