Crossover Steering Stabilizer

You are here


During a crossover steering conversion, the stock steering stabilizer is discarded. This kit mounts a new heavier duty stabilizer shock between the frame rail and the drag link, which keeps the shock up high and out of the reach of those pesky rocks.

Kit features a larger (9.25" stroke) and stronger shock, drag link mount and weld on frame mount. Frame mount is an assembled block and is easily welded to frame.

This stabilizer can also be mounted to the tie rod in a standard steering configuration (non-crossover). Simply remove the stock steering stabilizer and grind off its mount from the front of your axle and weld the included mount to your axle near the same location (instead of the frame). This is perfect when used with our Heavy Duty Marlink tie rod which lacks a stock steering stabilizer mount provision.

The included u-bolt mount kit is designed to fit a 1.25" steering linkage.

Proposition 65 Warning for California Consumers

WARNING: Products we sell can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to