Billet High Steer Arms

You are here


Each arm is CNC machined from solid billet USA steel made right here in California and features high strength USA-made Chromoly pins! All surfaces are machined including the split washer surface and the tie rod tapered holes. Machining these surfaces ensures correct and accurate contact between mating surfaces, preventing knuckle studs from being stressed and coming loose. Arms are angle compensated for correct rod end seating. Fits 1979 - 1985 Toyota Pickups/4Runners and Land Cruiser knuckles.

  • CNC machined solid billet USA steel
  • High strength USA-made Chromoly pins
    • We use a 78% larger 1-inch diameter pin-to-arm connection
    • The largest and strongest pin-to-arm connection on the market!
  • Design incorporates our 26 years of installing our HD Steering Kits since 1994

Don't risk something as important as your steering system for low quality imported steering arms! Support USA and use solid billet arms instead of untrustworthy cast arms!

We have made our arms large enough to be safely redrilled for 1-TON GM tie rod ends, or to be safely redrilled to fit up to 5/8" heim joints. Sorry, we do not offer this! You will have to source a machine shop on your own. We provide this information only for those looking at using different tie rod ends.

Includes 1 pair of our Billet High Steer arms for a 1979-85 Toyota front axle. This is the stock 17mm pin version for stock setups. If you are looking for our new 25mm Competition Series High Steer Arms, please see this page.

Proposition 65 Warning for California Consumers

WARNING: Products we sell can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to