Specials


CV Joint Double Cardan Cores

ON SALE
Price:
$100.00
On Sale! $75.00
11/18/20 Update: We are currently not offering any custom clearance-machined joints for increased misalignment angles. If you have any questions, please give us a call. Thank you!

We have many Toyota CV Joint cores that are useful when building custom drivelines, for example fitting a double-cardan joint to your rear drive shaft in a short wheel base application running our Dual Case setup.

OEM Toyota parts, made in Japan. Used with unknown miles. We will send a cut piece exactly as shown in the images.

We have the standard clearance IFS CV joints which are from 1986-88 4cyl IFS and 1988-95 V6 trucks and 4runners. These "IFS" CV joints can be machined to allow from more clearance. We are currently not offering the machining service for these. We do have 1984-95 4cyl and 1989-95 4cyl RF1A transfer case CV Joints which have more clearance internally from the factory and allow for a much greater misalignment angle.

We highly recommend using a multi-pattern Transfer Case flange (highly common with Rock Crawling builds) so that you are guaranteed a bolt pattern that fits.

Proposition 65 Warning for California Consumers

WARNING: Products we sell can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

LIMITED TIME Billet Aluminum Nameplate Badges

Bare Billet Aluminum Marlin Crawler NameplateMarlin Crawler Nameplate
ON SALE
Price:
$8.00
On Sale! $4.00

Special introductory price of just $5!

LIMITED TIME Billet Aluminum Nameplate Badges

Includes Billet Aluminum Nameplate Badge and two hammer-in stainless steel u-grove rivets (drill pilot holes using bit #44/0.086").

These were made for a joint-project with a company that has gone out of business and we are now selling them off! First come, first serve!

Specs:
Width: 2.700"
Height: 0.500"
Thickness: 0.115"
Hole Diameter: 0.088"
Hole Centers: 2.280"

Proposition 65 Warning for California Consumers

WARNING: Products we sell can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

Clutch Slave Cylinder for 1981-1995

ON SALE
Price:
$39.99
On Sale! $37.99
SKU: MCCL-622
Application
1981-1995 Hilux/4Runner
2.4-liter 4cyl or 3.0-liter 6cyl

Toyota factory clutch slave cylinders. These are genuine ASCO (Aisin Seiki COmpany) parts Made in Japan by Toyota. These are not aftermarket copies!

Proposition 65 Warning for California Consumers

WARNING: Products we sell can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

Clutch Slave Cylinder for 1995-2004 4cyl

ON SALE
Price:
$49.99
On Sale! $47.49
SKU: MCCL-623
Application
1995.5-2004 4cyl applications
2.4L 2RZ-FE & 2.7L 3RZ-FE

Toyota factory clutch slave cylinders. These are genuine ASCO (Aisin Seiki COmpany) parts Made in Japan by Toyota. These are not aftermarket copies!

For 2.4-liter 2RZ-FE and 2.7-liter 3RZ-FE 5-speed W59 manual transmissions.

Proposition 65 Warning for California Consumers

WARNING: Products we sell can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

Clutch Slave Cylinder for 1995-2004 6cyl

ON SALE
Price:
$49.99
On Sale! $47.49
SKU: MCCL-624
Application
1995.5-2004 6cyl applications

Toyota factory clutch slave cylinders. These are genuine ASCO (Aisin Seiki COmpany) parts Made in Japan by Toyota. These are not aftermarket copies!

For 3.4-liter 5VZ-FE 5-speed R150/R150F manual transmissions.

Proposition 65 Warning for California Consumers

WARNING: Products we sell can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

Clutch Master Cylinder, 1981-89 Pickup/4Runner

ON SALE
Price:
$59.99
On Sale! $56.99
SKU: MCCL-611
Application
1981-83 Hilux
1984-88 Hilux
1984-89 4Runner

Genuine factory Toyota ASCO (Aisin Seiki CO) clutch master cylinder made in Japan. These are not aftermarket copies!

Replace your aging clutch master cylinder today with this high quality OEM part!

Proposition 65 Warning for California Consumers

WARNING: Products we sell can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

Clutch Master Cylinder, 1989-95 Pickup/4Runner

ON SALE
Price:
$71.64
On Sale! $68.06
SKU: MCCL-612
Application
1989-95 Hilux
1990-95 4Runner

Genuine factory Toyota ASCO (Aisin Seiki CO) clutch master cylinder made in Japan. These are not aftermarket copies!

Replace your aging clutch master cylinder today with this high quality OEM part!

Proposition 65 Warning for California Consumers

WARNING: Products we sell can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

Clutch Master Cylinder, 1995-2004 Tacoma

ON SALE
Price:
$92.24
On Sale! $87.63
SKU: MCCL-613
Application
1995-2004 Tacoma

Genuine factory Toyota ASCO (Aisin Seiki CO) clutch master cylinder made in Japan. These are not aftermarket copies!

Replace your aging clutch master cylinder today with this high quality OEM part!

Proposition 65 Warning for California Consumers

WARNING: Products we sell can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

Clutch Master Cylinder, 1996-2000 4Runner

Clutch Master Cylinder, 1996-2000 4RunnerClutch Master Cylinder, 1996-2000 4Runner, Box
ON SALE
Price:
$99.99
On Sale! $94.99
SKU: MCCL-6141
Application
1996-2000 4Runner

Genuine factory Toyota ASCO (Aisin Seiki CO) clutch master cylinder made in Japan. These are not aftermarket copies!

Replace your aging clutch master cylinder today with this high quality OEM part!

Proposition 65 Warning for California Consumers

WARNING: Products we sell can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

Rear Shackle Hanger

ON SALE
Price:
$21.50
On Sale! $15.00
SKU: MCSU-53

When installing longer rear springs on your Toyota the rear spring mount must be cut off and relocated. If you do not wish to reuse the stock mount these are and ideal replacement. This is a must have part if your converting 91-95 coil sprung 4Runners over to leaf springs. Uses stock Toyota spring bushings. Heavy duty design.

These are designed to use our 120mm greasable shackle bolts without the need of a shackle spacer.

USA-made, USA-steel.

UPDATED DESIGN: Now includes two drilled holes for additional plug welding!

Now sold individually to make it easier for those who only need one. We pre-weld the shackle tube to the frame bracket and ship each Hanger unpainted and ready to weld on!

Tube width: 2-3/8", Tube I.D. designed for use with our Small Spring Bushings.

Please order Quantity (2) for two Shackle Hangers.

Proposition 65 Warning for California Consumers

WARNING: Products we sell can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

Spartan 8" 6cyl

ON SALE
OUT OF STOCK
Price:
$249.00
On Sale! $215.94
SKU: MCDF-233
Applications
1988-1994 Pickup (rear)
1989-1995 4Runner (rear)

Made in the USA! The Spartan Locker is a mechanical locker that installs into your stock carrier. This compact and simple design rivals much more expensive lockers. The Spartan Locker features a revolutionary spring-and-pin design that makes this drop-in locker stronger than the Lock Right locker. It features oversized pins (larger than the Lock Right) while the couplers and drivers are made from 9310 chromoly steel to compensate in strength.

These units provide affordable traction without the need of a professional installation. Each Spartan Locker carries a one year warranty against defect and is recommended for lighter vehicles with 35" or smaller tires.

Features:
  • Replaces spiders in standard differential case
  • Provides 100% lockup for maximum traction
  • Heat treated 9310 Steel for added strength
  • Patent pending design makes installation & removal much easier than other deigns
  • Deep heat treating & attention to tooth design provide long life & higher strength
  • Redesigned cross pin shaft
  • Eliminates need for thrust washers
Online Installation Instructions

Proposition 65 Warning for California Consumers

WARNING: Products we sell can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

Spartan 8" 4cyl

ON SALE
OUT OF STOCK
Price:
$299.00
On Sale! $252.92
SKU: MCDF-232
Applications
1979-1985 Pickup (F & R)
1984-1985 4Runner (F & R)
1986-1994 Pickup (rear)
1986-1995 4Runner (rear)

Made in the USA! The Spartan Locker is a mechanical locker that installs into your stock carrier. This compact and simple design rivals much more expensive lockers. The Spartan Locker features a revolutionary spring-and-pin design that makes this drop-in locker stronger than the Lock Right locker. It features oversized pins (larger than the Lock Right) while the couplers and drivers are made from 9310 chromoly steel to compensate in strength.

These units provide affordable traction without the need of a professional installation. Each Spartan Locker carries a one year warranty against defect and is recommended for lighter vehicles with 35" or smaller tires.

Features:
  • Replaces spiders in standard differential case
  • Provides 100% lockup for maximum traction
  • Heat treated 9310 Steel for added strength
  • Patent pending design makes installation & removal much easier than other deigns
  • Deep heat treating & attention to tooth design provide long life & higher strength
  • Redesigned cross pin shaft
  • Eliminates need for thrust washers
Online Installation Instructions

Proposition 65 Warning for California Consumers

WARNING: Products we sell can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

Spartan 7.5" IFS

ON SALE
OUT OF STOCK
Price:
$299.00
On Sale! $252.92
SKU: MCDF-231
Applications
1986-1995 Pickup (front)
1986-1995 4Runner (front)
1995-2004 Toyota Tacoma (front)
1993-1998 Toyota T100 (front)
2000-2006 Toyota Tundra (front)
2001-2007 Toyota Sequoia (front)

Made in the USA! The Spartan Locker is a mechanical locker that installs into your stock carrier. This compact and simple design rivals much more expensive lockers. The Spartan Locker features a revolutionary spring-and-pin design that makes this drop-in locker stronger than the Lock Right locker. It features oversized pins (larger than the Lock Right) while the couplers and drivers are made from 9310 chromoly steel to compensate in strength.

These units provide affordable traction without the need of a professional installation. Each Spartan Locker carries a one year warranty against defect and is recommended for lighter vehicles with 35" or smaller tires.

Features:
  • Replaces spiders in standard differential case
  • Provides 100% lockup for maximum traction
  • Heat treated 9310 Steel for added strength
  • Patent pending design makes installation & removal much easier than other deigns
  • Deep heat treating & attention to tooth design provide long life & higher strength
  • Redesigned cross pin shaft
  • Eliminates need for thrust washers

Online Installation Instructions

Proposition 65 Warning for California Consumers

WARNING: Products we sell can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

Spartan 9.5"

ON SALE
Price:
$319.00
On Sale! $257.24
SKU: MCDF-235
Applications
1969-1983 40-series
1969-1980 55-series
1981-1987 60-series
1988-1990 62-series
1991-1997 80-series
1996-1997 Lexus LX450

Made in the USA! The Spartan Locker is a mechanical locker that installs into your stock carrier. This compact and simple design rivals much more expensive lockers. The Spartan Locker features a revolutionary spring-and-pin design that makes this drop-in locker stronger than the Lock Right locker. It features oversized pins (larger than the Lock Right) while the couplers and drivers are made from 9310 chromoly steel to compensate in strength.

These units provide affordable traction without the need of a professional installation. Each Spartan Locker carries a one year warranty against defect and is recommended for lighter vehicles with 35" or smaller tires.

Features:
  • Replaces spiders in standard differential case
  • Provides 100% lockup for maximum traction
  • Heat treated 9310 Steel for added strength
  • Patent pending design makes installation & removal much easier than other deigns
  • Deep heat treating & attention to tooth design provide long life & higher strength
  • Redesigned cross pin shaft
  • Eliminates need for thrust washers

Online Installation Instructions

Proposition 65 Warning for California Consumers

WARNING: Products we sell can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

Center Diff Spool

ON SALE
Price:
$279.00
On Sale! $249.00
SKU: MCTC-154

We are excited to release our 80- & 100-series Transfer Case Part Time Spool Kit! Made in Japan exclusively for Marlin Crawler, our Spool Locker replaces the factory transfer case differential carrier assembly permanently locking the rear output to our spool itself.

Our Japanese manufactured Marlin Crawler spool replaces the factory transfer case differential and deletes the viscous coupling. This spool is an excellent complement to our 3.12:1 Crawler Gears and allows you to convert from Full-time 4WD, or All-Wheel Drive, or Selectable 4WD High Range. Additional parts are needed included an OEM Switch and Locking Hubs to complete the conversion. The use of locking hubs allows for a better steering feel, less wear on front axle parts (important with inner axle shaft upgrades), and increase fuel mileage.

Proposition 65 Warning for California Consumers

WARNING: Products we sell can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.