Install this scale replica Warn 9.5CTI Winch to complete the replica look of Marlin's 1980 Crawler Truck!
In order for this to fit our scale replica bumpers, both plastic (default) or metal (upgraded), just like it's 1:1 counterpart you'll need to replace the roller fairlead with our scale replica Hawse Fairlead.
Requires a Winch Controller to interface this with our 1/10th Crawler Truck's 3-channel radio. Sold separately.
This Winch is officially licensed by Warn and is a highly accurate replica as used by Marlin himself on the real 1:1 Crawler Truck.Specifications:
- Cast Aluminum Case
- Stamped Steel Components
- Working Spring Loaded Warn Hook
- Synthetic Winch Rope
- Highly Detailed
- Full Warn Decals Installed
- Operating Voltage: 6v to 11.1v
- Can operate on 3 Cell Lipo
- Easily Rebuildable
- 3ft / .9m Rope Pre-Installed
- Load Limits: Dead Lift 6.6lbs / 3kgs
- Load Limits: Rolling Drag 9lbs / 4.1kgs
- 30 Day RC4WD Warranty
- Length: 2.9in / 73.68mm
- Total Width: 1.25in / 31.75mm
- Height: 1.31in / 33.56mm
- Weight: 2.1oz / 60g
Shown installed onto our 1/10th Scale Marlin Crawler Front Bumper, which
requires the conversion of the roller fairlead with our Hawse Fairlead, sold separately.
Proposition 65 Warning for California Consumers
WARNING: Products we sell can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.