T50 Torx Socket

You are here


Our bolt pattern conversion plates use a custom made high quality 10mm counter-sunk bolt with a T50 Torx head. The days of using the hard to find Ford "D" bolts are finally over!

We chose this design for our own custom bolt because it is harder to strip-out and is counter-sunk and away from rocks.

If you don't already have a T50 socket in your tool box, then we highly recommend ya grab one with your next order!

Designed for a 3/8-inch drive ratchet.

Proposition 65 Warning for California Consumers

WARNING: Products we sell can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

Related Products