This is ARB's official replacement 12v electric Air Solenoid.
If you run an ARB Air Locker then you know you must have a valve to apply air and release air. ARB supplies an electric Solenoid with all Air Lockers. If one becomes damaged then the reliability of you lockers are jeopardized. For this reason we like to carry an extra spare solenoid on the trail to self-repair or to help someone else out!
Solenoids come with ARB's electric connector and will thread to the 1/8" BSPT fitting for the compressor inlet and the "push-in" fitting for the air line outlet. They are serviceable and easily rebuilt. Click here to view rebuild instructions.
Please note these use British standard (BSPT), not American standard (NPT), threads so if you're using this for other projects then make sure you pick up 1/8" BSPT fittings.
Here are what they look like installed onto CruzrDave's red FJ40, using our
90-degree exhaust vent adapters to prevent oil spray in your engine compartment:
Proposition 65 Warning for California Consumers
WARNING: Products we sell can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.