Pickup / 4 Runner Master Cylinder
Replacement master cylinder
for older Pickup's and 4Runners with smaller
bore (bore size is cast into right side of housing).
Fits 1979-1995 Pickup/4Runner. Features 1"
piston and residual valves for both front and
rear. Works with both drum and disc brakes.
Bolt on installation. Includes reservoir. On
1979-1985 Trucks and 4Runners the smaller factory
bore works fine with stock, solid front rotors
and 8" rear drums. If you upgrade the rear
to larger 1986 and up, 10" drums and/or
upgrade the front to a vented style caliper
you will want to install a 1" bore master
cylinder like this one for additional volume. |
|
Upgrading your
brakes without changing the master cylinder results
in excess brake pedal travel. If you have upgraded
your brakes on a 1979 to 1985 truck and
now you have to push the peddle nearly to the
floor, this master cylinder will make the peddle
feel like it should.
|
 |
MC-14852, FJ80 Non ABS Master Cylinder $129 |
|
FYI: In the above picture, the left outlet port operates
the front brakes, and the right output port operates the rear brakes.
Just remember, the front port (furthest from the booster) works the
front, and the rear port (closest to the booster) works the rear brakes.
|
